Your position: Home / Virtual Reality Series / HTC VR Series / Vive Virtual Reality

HTC Vive 960mAh Battery Akku BOPLH100 35H00244-00M HTC Vive Controller Battery Replacement

35H00244-00M
HTC Vive Controller Battery / Deluxe Audio Strap Battery
Price:
$28.95
(31% OFF)
    Please select the information you wantX
Quantity:
-
+
(10 Units available)
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
  • Description
  • How to replace the vive battery?
  • Reviews(10)
BATTERY_LI-POLYMER,960mAh,3.85V,ATL,ATL,671669,GB-S10-671669-010H,w/o water label,60degC,60/-20degC,71.5*16.14*6.85mm for HTC Vive Controller Battery / Deluxe Audio Strap Battery
The HTC Vive controller battery may be weak or faulty from extended use and causing power or functionality problems. The battery is essential for the remote to power up and perform. It is important not to puncture the battery while removing. This guide will show you how to replace the battery.

Step 1st:
Turn over the Vive controller so that the bottom saucer is facing up.
Use the T5 Torx screwdriver to remove three black 21mm screws from the bottom saucer.
 
  •  

Step 2nd: 
Use the nylon spudger to separate the top and bottom saucer covers all around the edges.
Remove only the top saucer cover by pulling up with your hand.
 
  •  

Step 3rd:
Use the Phillips 00 screwdriver to remove the three silver 12.8mm screws from the exposed upper sensor panel
  •  

Step 4th:
Remove the bottom saucer cover by pulling down with your hand.
 
  •  

Step 5th:
Use the T5 Torx screwdriver to remove the two black 5.2mm screws on the back gray panel.
Turn over the Vive controller so that the exposed bottom saucer panel is facing up.
Use the T5 Torx screwdriver to remove the three black 5.2mm screws.
 
  •  

Step 6th:
Use the nylon spudger to separate the front panel gently by running the spudger around the edges of the handle.
Only separate the front panel around the edges. Do not try to completely remove the panel yet.
Gently lift the right side of the panel to the left.
 
  •  

Step 7th: 
Disconnect the upper ribbon cable gently by pulling the ribbon up and away from the motherboard with two fingers.
Do not try to disconnect the ribbon cables from the front panel.
Disconnect the middle ribbon cable gently by pulling the ribbon cable up and away from the motherboard with two fingers.
Do not try to disconnect the ribbon cables from the front panel.
 
  •  

Step 8th:  
Use the nylon spudger to lift the white tab by 90 degrees.
Disconnect the bottom ribbon cable gently by pulling the ribbon cable down with two fingers.
 
  •  

Step 9th:  
Use the Phillips 00 screwdriver to remove two black 2.8mm screws from the silver plate.
Use the Phillips 00 screwdriver to remove the black 5.8mm screw from the bottom right corner of the silver plate.
Remove the silver plate by pinching it with two fingers and lifting up.
 
  •  

Step 10th:  
Use the Phillips 00 screwdriver to remove the black 5.8mm screw from the top left of the battery frame.
Use the T5 Torx screwdriver to remove the two silver 4.2mm screws from the bottom of the battery frame.
 
  •  

Step 11th:  
Disconnect the three-pin cable gently by pinching the cable with two fingers and pulling up.
 
  •  

Step 12th:  
Lift the battery frame to remove the battery from the Vive controller
 
  •  
Average rating: 5.0 based on 10 reviews
Share your thoughts with other customers
Write a review
Copyright © 2005-2019 Vone Technology All Rights Reserved.     
Message Us

Mobile Repair Parts Whole on Biteable.